(1)Mode memory function: if the flashlight is turned on more than 3seconds ,current mode can be memoried.Turn it off and then turn it on ,still the original mode. if less than 3seconds ,Turn it off and then turn it on ,it goes into the next mode.
(2)Low voltage protection function: when the voltage of battery is 2.9-3.1V,the flashlight flashes 2times/sec with low brightness,it's a low voltage alarm.
(3)Battery reverse protection:if your battery is reversed,dont worry ,no any problem will happen.
Switch-direct-rechargeable series flashlight manual
Thank you for purchasing this product, please read this manual in detail before using this product .
Do not turn on the torch in front of people 's eyes ! Otherwise it will cause temporary blindness !
You can find out the charge-state by observing the reflector.(Turn off the flashlight)
1.This series of products use the following proprietary patented technology:" Integrated switch-direct-rechargeable structure" ( Patent No. 201320292675.9 ),and use high performance LED and intelligent driver.
2.In addition to energy efficient, durable , this flashlight has the following characteristics :
3.This flashlight can be recharged without removing the battery,you just connect the switch with the charge-connector,then use the USB to microUSB cable to connect the 5V power.
4.You can click the charge-connecter to make the flashlight work when charging.
5.Charge-connector firmly clasps the switch non-magnetically.
6.The driver has battery-protection and charging display function.
7.The driver is intelligent ,supplies constant current,has three lighting modes and two flash modes,has Low-voltage alarm function and memory function.
8.The pill is integrated the host to make the heat of LED spread faster.
9.The host is made of aviation aluminum.HA oxidative surface,good wear properties.
10.The reflector is made of aviation aluminum.Vacuum Coating
This series of products have a wide range of applications, suitable for outdoor lighting , home lighting, emergency lighting and a long patrol lighting.
3.Flashlight structure and charging accessory diagram
The Switch is divided into two categories:side-switch and tail-switch
(see the following diagram).
1.The battery installation:screw the tail,the put the battery in.Notice!Battery positive towards the torch head(side switch), Battery positive towards the torch tail (tail switch)
2.Charge:connect the switch with the charge-connector,then use the USB to microUSB cable to connect the 5V power.Notice!When charging is completed,unplug the microUSB port first ,then remove the connector.
3.Charging indicator:indicator emits red light when charging,emits green light when full charging.indicator in the reflector(side switch flashlight),indicator on the tail(tail switch flashlight)
4.Charging adapter:5V power.For example:phone adapter,PC USB port,mobile power etc.
5.Switch operating:click the button to turn the flashlight on or off.Gently click the switch to choose modes.the brightness depends on the current when the battery is low-voltage or turning on the flashlight in the state of charge
6.Modes:low-middle-high-stobe-SOS,the mode can be remembered if turnning on the flashlight above 4 seconds.
7.Low voltage alarm:when the voltage is below setting value, LED twinkles.the batteries must be charged at this time.
8.Battery storage:remove the battery from the flashlight if you dont use the flashlight for a long time.Battery should be full charged once every month if you dont use it chronically.
Unit Type: piece
Package Weight: 0.195kg (0.43lb.)
Package Size: 10cm x 10cm x 10cm (3.94in x 3.94in x 3.94in)